At The Healthy Abode Inc. we perform Mold Testing and Mold Inspection (both Initial and Clearance) and write Scopes of Work for mold remediation for owners, property managers, contractors and any other person or group who may require such a service in compliance with CCA-82. We are fully insured and WSIB. Our reports are fully legal and certified.
We area able to get you your final mold report in as little as 1 business day. Contact us or call for an estimate over the phone, 647-889-2254.
Providing Mold Testing and Inspection to the GTA and South-Western Ontario
Initial Meeting over Phone: When you decide to call The Healthy Abode Inc. regarding mold testing, we will knowledgeably answer all of your questions and provide you with a detailed account of our services, if requested.
Visual Inspection: If you and one of our certified inspectors agree that your home may contain mold and require mold testing, we will come to your home and perform a visual inspection. This is a comprehensive inspection of your home and if need be we will check the outside including your roof, your garage, your deck/porch, window fixtures/sills etc.; the inside, including everything from your basement (cold room, crawl space) to your attic, and your HVAC system. Our objective when doing a visual inspection is to identify the source of moisture intrusion into your home as well as identify the possible existence of mold.
Pre-Inspection Report: Before beginning the visual inspection and mold testing we will sit down with you and ask some important questions about your home (this is considered the pre-inspection report.)
Professional Sampling: The Healthy Abode Inc. is qualified to perform any type of necessary sampling in your home. This includes the following sampling techniques, air, surface/bulk (swab/tape-lift) and dust sampling for mold testing. For these procedures, we only perform the necessary sampling and we only use professional equipment.
Sampling sent to a Certified Third Party Laboratory: We submit our samples from your mold testing and inspection appointment to a third party laboratory the same day that they were taken from your home. The turn around time for the lab is 1-4 business days for all types of mold testing, including Air, Bulk & Swab. All of our samples are properly labeled and submitted with a Chain of Custody form, which allows us to trace possession of the sample form the point of collection to receipt from the lab. This maintains the integrity of your samples.
Written Report of the Results: The laboratory provides a detailed written report of the mold testing samples from your home. This includes the following information: spore identification (which identifies the type of mold found), spore description, certificate of mold analysis (which identifies the actual raw count and spore/m3 count in and around your home. This analysis tells us if the levels of mold in your home are elevated or not) and a report summary.
In addition to the laboratory report, The Healthy Abode Inc. provides you with our own mold testing report (including the pre-inspection report) that explains the lab mold testing report in further detail, as well as outlines all of our notes and observations, including photos and meter results, taken throughout our inspection of your home.
Verbal Explanation of the Reports: It is very important to us that you feel comfortable with both the laboratory and inspection reports. This is why we will discuss with you the results and explain them in a manner that satisfies your understanding. At this point we will answer any questions you may have regarding the mold testing, including providing recommendations. If necessary, we will put you in contact with a professional certified remediation firm.
Clearance Sampling: Once remediation has been performed, if necessary, we will come back to your home and take a final sample set, called Clearance Mold Testing. This will verify that the proper removal of mold has in fact taken place, and reassure you that your home no longer possesses the health and structural threat of mold.
Have you noticed a musty odour in your home or perhaps seen evidence of mold growing somewhere in your basement or crawl space? Perhaps you or one of your family members have experienced allergies and you are not sure what it may be attributed to, it could be mold.
Mold is often smelled or causes allergic reactions before it can be seen. Mold is a result of moisture intrusion issues in your home. It can cause health problems and it can affect the structural safety of your home.
Below are some useful facts to help your knowledge of mold and to help you better understand if you may require mold testing .
According to the Canada Mortgage and Housing Corporation (CMHC) in order to better understand mold growth one must know the following important facts:
-mold can be harmful or helpful – depending on where it grows
-mold needs moisture to grow
-mold growing inside a home can negatively affect the occupants’ health
What does this mean? Do I need Mold Testing?
Mold can be Harmful or Helpful
As stated in the CCA 82 – 2004 Mould Guidelines for the Canadian Construction Industry:
“Mould, or fungi, has existed on Earth since life first began, and results in the natural decomposition (recycling) of organic materials. In the built environment, fungi and mould damages wood, wallboard and other materials and causes them to rot. The growth of fungi on materials in the built environment can affect human health, depending on the extent of growth, the length of exposure, and the health status of the exposed personnel. Because many regulatory agencies now consider mould growth a health hazard, there has been an increase in litigation, originally limited to the United States but now being seen in Canada.”
However, mold can also be helpful. The drug penicillin is obtained from a specific type of mold, as well as some foods and beverages are made by the actions of mold, one obvious example of this is cheese. The important differentiation between helpful and harmful molds is that the good types of molds are usually selected and grown in a controlled fashion. The bad types of molds, are the types that enter a building or structure and grown due to some sort of moisture intrusion problem. These are the molds that we can assess with professional mold testing and that if homeowners are not careful, can rapidly grow (24-48 hrs), and become a very prominent health issue. If you suspect you may have a mold problem it is important to contact a certified inspection and mold testing company sooner rather than later. If mold is caught quickly, remediation efforts and health affects will likely be greatly reduced.
Mold Needs Moisture to Grow
There exists some estimated 300 000 species of mold in the world. In Canada, there are over 1 000 varieties. The specific species of mold and quantity of spores should be identified by a certified laboratory, as a result of a professional taking a proper sample during your scheduled mold testing appointment.
Mold exists to a certain extent everywhere. There are microscopic spores in almost every location on the globe. Mold only becomes a problem when it starts to take over an existing surface, like a wall or bathroom tiles and grout. This is when the mold growth, because of its’ extreme concentration in these such cases, can become a health hazard and/or a structural problem for your home.
Mold is a very simple life form that needs only moisture and a food source (which could be almost any surface found around the home.) Mold exists in two stages and can complete its’ growth process in 48 hours. Moisture is the most important component that mold needs to grow, as it does not need light or any specific food source or surface. Of course, mold will grow easier on a porous surface such as concrete; however mold may grow even on non-porous surfaces such as glass. A swab or bulk sample during your mold testing appointment can determine whether mold is in fact growing on a specific surface.
Mold Growing inside a Home can negatively affect the Occupants’ Health
As most people are aware it is now considered fact by the scientific and health care communities that mold does negatively affect human health. Depending on the individual, their exposure and the type of mold the affects may vary from a very minor allergic reaction (sniffling, congestion, hay fever) to exceptionally severe, invasive disease such as asthma and other lung issues, as spores may enter the lungs. Some molds, such as stachybotrys, may produce extremely toxic (potent) mycotoxins. Exposure to these toxins can occur through inhalation, ingestion or dermal exposure.
Mold can grow in your home without necessarily being seen (i.e. behind the drywall, in your HVAC system). Even though you may not see the mold, it can still affect the health of you and your family. If members of your family start to exhibit such symptoms as coughing, hay fever, asthma symptoms, nail infections etc. you may want to consider having a mold testing professional check your home.